12vDC geared stepper motor PM25 Micro gearbox motor
Description
This motor is a 25 mm diameter motor with a height of 25 mm. The basic step angle of the motor is 7.5 degrees. After the reducer decelerates, the step angle resolution can reach 0.075~0.75 degrees, which can achieve accurate position control and other functions.
Product standard gear reduction ratio: 1:10 1:15 1:20 1:30 1:30 1:60 1:75 1:100
On the basis of matching reducer with stepping motor, the stepping motor adopts an external reducer with built-in structure and metal gears, which are easy to transmit greater torque
This product is mainly used for toilet valve, camera, PTZ and other occasions.
Parameters
| Model No. | SM25-048S-193/10 |
| Current Per Phase | 120 mA/Phase |
| Winding Resitance | 100±10% Ω at (25℃) |
| Rated voltage | 12 V DC |
| No. of phases | 4 phases |
| Step Angle | 7.5°/10 |
| Max Pull-in Rate | 500PPS |
| Holding Torque | 1000 g.cm |
| Pull-in Torque at 100pps | 400 g.cm |
| Winding temperature at 900pps | ≤65K |
Design Drawing
Example of the same type of motor
About geared stepper motors
The gear box has high precision, high efficiency and low noise, which makes the product have good reliability.
The power input position of the stepper motor can be in the form of FPC, FFC, PCB cable, etc.
The output shaft of the motor can adopt various output structures, such as circular shaft, D-shaft and wire bar.
Typical Applications
* Saliva Analyzer
* Blood Analyzer
* Welding Machine
* Intelligent Security Products
* Fiber Fusion Splicer
* Digital Electronics
Lead time and packaging information
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Packaging:
Samples are packed in foam sponge with a paper box, shipped by express
Mass production, motors are packed in corrugated cartons with transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
Shipping Method
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai port. (45~70 days for sea shipping)
FAQ
1.Are you a manufacturer?
Yes, we are a manufacture, and we produces mainly stepper motors.
2.Where is your factory location? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. Yes, you are very welcome to visit us.
3.Can you provide free samples?
No, we don’t provide free samples. Customers won’t treat free samples fairly.
4.Who pays for shipping cost? Can I use my shipping account?
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we can use you shipping account.
5.What’s you MOQ? Can I order one motor?
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the motor is damaged during your testing, and you can have a back-up.
6.We are developing a new project, do you provide customization service? Can we sign a NDA contract?
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set customization from design drawing to production.
We are confident we can give you few advice/suggestions for your stepper motor project.
If you are worrying about confidential issues, yes, we can sign a NDA contract.
7.Do you sell drivers? Do you produce them?
Yes, we do sell drivers. They are only suitable for temporary sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors
Products categories
-
High precision 20mm pm stepper motor with circu...
-
Micro Gear Stepper Motor 25PM Linear Motor For ...
-
High precision 35mm planetary gearbox stepper m...
-
20mm diameter stepper motor with gearbox 20BY45...
-
Efficient NEMA 17 hybrid motor with planetary g...
-
M3 screw shaft 2 phase 10mm mini gear type step...